Leading 10 common forklift accidents ， forklift procedure should focus on these issues ！.

Leading 10 common forklift accidents ， forklift procedure should focus on these issues ！.

Blog Article

Do not undervalue the forklift at the office. If the operation is bad, there will be severe crashes in minutes, and there are lots of crashes involving forklifts.

Instance 1: The forklift freight obstructed the chauffeur's view, and the individual ahead can not be located, resulting in a moving crash.
Case 2: In order to preserve the equilibrium of the forklift when lifting hefty items, the employees used their body weight as the weight, which virtually created casualties.
Situation 3: The size of the forklift freight goes beyond the allowable width of the path and holds on the roadside rack, which nearly causes an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Case 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift raises the workers unlawfully, the forklift vehicle driver does not wear the seat belt, the forklift lifter drops and the driver is squashed when the forklift rolls over.
Instance 7: The forklift chauffeur did not wear a safety belt and fell from the automobile when it surrendered and was squashed.
Forklift operation should take notice of these matters ：.

Start.
1. Before starting, observe the environments, and after validating that there are no barriers that hinder the safety and security of driving, honk the horn first and then start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) scale need to be secure before beginning.
3. When the forklift begins with a load, the motorist needs to first validate that the load is steady and trusted.
4. The start should be slow-moving and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the pole needs to be tilted backwards. .
2. Do not raise the fork too high when driving. When getting in and leaving the work website or while driving, be careful that there will certainly be no obstacles in the sky. When the load is taking a trip, the fork must not be elevated expensive, which will affect the stability of the forklift. .
3. After discharging, the fork needs to be decreased to the typical driving placement prior to driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal needs to be released first. High-speed sharp turns are banned. High-speed doglegs will create the lorry to shed lateral security and tip over. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique conditions.
6. When the forklift is running, it has to follow the traffic rules in the factory and need to maintain a specific safety distance from the vehicle ahead. .
7. When the forklift is running, the lots should remain in the most affordable position that does not impede the driving, and the gantry needs to be properly slanted back. The load will not be elevated except when stacking or loading. .
8. The height of the lots have to not block the chauffeur's sight. In special scenarios, when the thing impacts the forward vision, drive at a reduced speed when turning around.
9. It is restricted to activate the ramp, nor to drive across the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive safely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing function. .
12. If problems are located, they will certainly be repaired and reported in a timely fashion, and they will never run with ailments or conceal them.

loading and dumping.
1. When fork-loading products, the distance in between the two forks ought to be readjusted as required to make the load of both forks balanced and not manipulated, and one side of the product ought to be against the shelf. .
2. It is forbidden to collaborate with a solitary fork or use a fork top or draw. In special circumstances, safety and security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of packing and unloading products, the forklift must be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When using a fork to fork the goods, the fork must be as deep as possible under the tons, and it should be noted that the fork pointer ought to not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The pole can be tilted forward a little when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and ram tough objects with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to stand around the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is banned, and it is prohibited to utilize forks to lift workers to take part in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not enabled to use the brake inertia to slide, place, round or roll things. .
10. It is not allowed to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Draw the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the vehicle driver does not leave the lorry's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance should be examined, and gas, lubing oil and cooling water ought to be added.
2. Check the safety and security efficiency of beginning, running and Stand-on Electric Pallet Stacker braking.
3. Check whether the lights and horn signals are complete and reliable.
4. Throughout the procedure of the forklift, check whether the pressure and temperature level are regular.
5. After the forklift is running, the exterior leakage should also be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the cars and truck;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the propensity of " totally free switching";.
6. Running up and down the incline must be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into large or hefty goods and most likely to the driver's line of vision, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the Stand-on Electric Pallet Stacker fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on slopes
.
Auto parking is not allowed under the following conditions.
1. Curves, slim roadways, train crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844